Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ando, Masami; Wakai, Eiichi; Sawai, Tomotsugu; Matsukawa, Shingo; Naito, Akira*; Jitsukawa, Shiro; Oka, Keiichiro*; Tanaka, Teruyuki*; Onuki, Somei*
JAERI-Review 2004-025, TIARA Annual Report 2003, p.159 - 161, 2004/11
The objectives of this study are to evaluate radiation hardening on ion-irradiated F82H up to 100 dpa and to examine the extra component of radiation hardening due to implanted helium atoms (up to 
3000 appmHe) in F82H under ratio of 0, 10, 100 appmHe/dpa.The ion-beam irradiation experiment was carried out at the TIARA facility of JAERI. Specimens were irradiated at 633 K by 10.5 MeV Fe ions with/without 1.05 MeV He ions. Micro-indentation tests were performed at loads to penetrate about 0.40 mm in the irradiated specimens using an UMIS-2000. The results are summarized as follows:1) As a result of the single irradiated F82H, the micro-hardness tended to increase about 30 dpa. 2) The extra radiation hardening was obviously caused by co-implanted helium atoms more than 1000 appm in F82H irradiated at 633 K. 3) In the dual-beam (100 appmHe/dpa) irradiated microstructure, nano-voids and fine defects were observed. It is suggested that the formation of nano-voids causes the extra radiation hardening by helium co-implantation.
Shiba, Kiyoyuki; Enoeda, Mikio; Jitsukawa, Shiro
Journal of Nuclear Materials, 329-333(Part1), p.243 - 247, 2004/08
Times Cited Count：53 Percentile：94.45(Materials Science, Multidisciplinary)no abstracts in English
Ando, Masami; Tanigawa, Hiroyasu; Jitsukawa, Shiro; Sawai, Tomotsugu; Kato, Yudai*; Koyama, Akira*; Nakamura, Kazuyuki; Takeuchi, Hiroshi
Journal of Nuclear Materials, 307-311(Part1), p.260 - 265, 2002/12
Times Cited Count：39 Percentile：90.08(Materials Science, Multidisciplinary)no abstracts in English
Oda, Tomomasa*; Hirohata, Yuko*; Hino, Tomoaki*; Sengoku, Seio
Shinku, 43(3), p.325 - 328, 2000/03
no abstracts in English
Tanigawa, Hiroyasu
no journal, ,
The fusion structural materials, especially those in blanket system, will be subjected to high heat loads and high flux 14 MeV fusion neutrons, and will experience thermal stresses, substantial magnetic forces in case of plasma disruptions, and high pressure loads in the case of a coolant leak. For this use, the structural material must have an adequate database including irradiation database to assure the mechanical properties, and to define the limits for its usage, along with sound technical bases on full scale manufacturing and joining technologies. In this talk, the strategy to develop fusion structural material in view of design requirement is discussed in case of structural material development for fusion blanket system.
